Mitsubishi MOTORS Outlander PHEV 2018, Руководство пользователя

Страница: 265 / 457

Multi-information display
5-144 Features and controls
5
N00557001279
You can change the mode condition for the
average fuel consumption to “Auto reset” or
“Manual reset.”
1. Press and hold the multi-information dis-
play switch (for approximately 2 seconds
or more) to switch from the setting mode
screen to the menu screen.
Refer to “Changing the function settings”
on page 5-143.
2. Lightly press the multi-information dis-
play switch to select “AVG” (average fuel
consumption setting).
3. Press and hold the multi-information dis-
play switch (for approximately 2 seconds
or more) to switch in sequence from A or
1 (Auto reset)

M, 2 or P (Manual reset)

A or 1 (Auto reset).
The setting is changed to the selected
reset condition.
 If you press and hold the multi-informa-
tion meter switch when the average fuel
consumption is displayed, these calcula-
tions will be reset to zero.
 When the operation mode is changed
from ACC or OFF to ON, the mode set-
ting changes automatically from manual
to auto.
 When the average fuel consumption is
being displayed, if you hold down the
multi-information display switch, these
calculations will be reset to zero.
 When the operation mode has been in
ACC or OFF for approximately 4 hours or
more, the average fuel consumption dis-
play will automatically reset.
N00557101209
The fuel consumption display unit can be
changed. The distance and amount units are
also changed to match the selected fuel con-
sumption unit.
NOTE
 If the 12 V starter battery is disconnected,
these function settings are reset from mem-
ory and is automatically to the factory set-
tings (except the tire ID set).
 You cannot select an item that is displayed
dimly on the menu.
Changing the reset mode for aver-
age fuel consumption
Manual reset mode
Auto reset mode
NOTE
 The average fuel consumption display can be
reset separately in both auto reset mode and
manual reset mode.
 Disconnecting the 12 V starter battery cable
will erase from memory the manual reset
mode or auto reset mode setting for the aver-
age fuel consumption display.
 The initial (default) setting is “Auto reset
mode”.
Changing the fuel consumption
display unit
BK0254400US.book 144 ページ ２０１７年８月１０日 木曜日 午後１時５０分