Mitsubishi MOTORS Outlander PHEV 2018, Руководство пользователя

Страница: 310 / 457

Wiper and washer switch
Features and controls 5-189
5
With the lever in the “AUTO” (rain sensor)
position, it is possible to adjust the sensitivity
of the rain sensor by turning the knob (B). Move the lever in the direction of the arrow
and release, to operate the wipers once.
Use this function when you are driving in
mist or drizzle.
The wipers will operate once if the lever is
raised to the “MIST” position and released
when the operation mode is in ON or ACC.
The wipers will continue to operate while the
lever is held in the “MIST” position.
The wipers will operate once if the lever is
moved to the “AUTO” position and the knob
(C) is turned in the “+” direction when the
operation mode is in ON.
N00504601426
The windshield washer can be operated with
the operation mode in ON or ACC.
The washer fluid will be sprayed onto the
windshield by pulling the lever toward you.
When the wipers are not in operation or in
intermittent operation, by pulling the lever
toward you, the wipers will operate several
times while the washer fluid is being sprayed.
To adjust the sensitivity of the rain sensor
“+”- Higher sensitivity to rain
“-”- Lower sensitivity to rain
NOTE
 Automatic wiper operation (rain sensitive)
can be changed to intermittent operation,
either vehicle speed sensitive or not vehicle
speed sensitive.
For further information, please contact a cer-
tified Mitsubishi EV dealer.
On vehicles equipped with the Smartphone
Link Display Audio, screen operations can
be used to make the adjustment.
Refer to the separate owner’s manual for
details.
Misting function
Windshield washer
BK0254400US.book 189 ページ ２０１７年８月１０日 木曜日 午後１時５０分