Mitsubishi MOTORS Outlander PHEV 2018, Руководство пользователя

Страница: 193 / 457

Brake assist system
5-72 Features and controls
5
N00562701102
1. Stop the vehicle completely using the
brake pedal.
2. Release the brake pedal and the hill start
assist will maintain the braking force
applied while stopped for approximately 2
seconds.
3. Depress the accelerator pedal and the hill
start assist will gradually decrease the
braking force as the vehicle starts moving.
N00562801116
If an abnormal condition occurs in the sys-
tem, the following display/indicator will turn
on.
Warning display
N00567301129
The brake assist system is a device assisting
drivers who cannot depress the brake pedal
firmly such as in emergency stop situations
and provides greater braking force.
If the brake pedal is depressed suddenly, the
brakes will be applied with more force than
usual.
 The hill start assist is not designed to keep
the vehicle stopped in place on uphill slopes
for more than 2 seconds.
 When facing uphill, do not rely on using the
hill start assist to maintain a stopped position
as an alternative to depressing the brake
pedal.
Doing so could cause an accident.
 Do not put the operation mode of the power
switch in OFF or ACC while the hill start
assist is operating. The hill start assist could
stop operating, which could result in an acci-
dent.
To operate
NOTE
 The hill start assist is activated when all of
the following conditions are met.
CAUTION
• The Plug-in Hybrid EV System is operat-
ing.
(The hill start assist will not be activated
while the Plug-in Hybrid EV System is
starting or immediately after the Plug-in
Hybrid EV System is started.)
• The select position is in any position other
than “P” (PARK) or “N” (NEUTRAL).
• The vehicle is completely stationary, with
the brake pedal depressed.
• The parking brake is released.
 The hill start assist will not operate if the
accelerator pedal is depressed before the
brake pedal is released.
 The hill start assist also operates when
reversing on an uphill slope.
Warning display
- ASC indicator
NOTE
CAUTION
 If the warning is displayed, the hill start
assist will not operate. Start off carefully.

Park your vehicle in a safe place and stop the
Plug-in Hybrid EV System.
Restart the Plug-in Hybrid EV System and
check whether the indicator/display goes out,
in which case the hill start assist is again
working normally.
If they remain displayed or reappear fre-
quently, it is not necessary to stop the vehicle
immediately, but the vehicle should be
inspected by a certified Mitsubishi EV dealer
as soon as possible.
Brake assist system
BK0254400US.book 72 ページ ２０１７年８月１０日 木曜日 午後１時５０分