Mitsubishi MOTORS Outlander PHEV 2018, Руководство пользователя

Страница: 314 / 457

Heated steering wheel switch (if so equipped)
Features and controls 5-193
5
N00589100029
The heated steering wheel contains internal
heaters in the rim. Heating areas are shown in
the illustration.
: Heating area
The heated steering wheel can be operated
when the operation mode of the power switch
is in ON.
To turn on the heated steering wheel, push the
heated steering wheel switch. The heated
steering wheel will operate for approximately
30 minutes and then it will automatically turn
off.
The indicator light (A) will illuminate while
the heated steering wheel is operating.
N00523801238
To honk the horn, press around the “ ” mark
on the steering wheel.
N00563701183
The Link System takes control of the devices
connected via the USB input terminal or the
Bluetooth
®
device; the system allows the
connected device to be operated by using the
switches in the vehicle or voice commands.
For details on how to operate, refer to “USB
input terminal” on page 5-194 and the sepa-
rate owner’s manual.
Bluetooth
®
is a registered trademark of
BLUETOOTH SIG, INC.
Heated steering wheel
switch
(if so equipped)
WARNING
 Persons who are unable to feel tempera-
ture change or skin pain due to age, ill-
ness, injury, medication, fatigue or other
physical conditions or who have sensitive
skin may suffer burns when using the
heated steering wheel. To reduce the risk
of burns, people with such conditions must
use care when using the heated steering
wheel.
CAUTION
 If water or any other liquid is spilled on the
steering wheel, allow it to dry thoroughly
before attempting to use the heated steering
wheel. Turn the heated steering wheel off
immediately if it appears to be malfunction-
ing during use.
 Also be aware that using the heated steering
wheel with the ready indicator off may run
the 12 V starter battery down.
Horn switch
Link System
BK0254400US.book 193 ページ ２０１７年８月１０日 木曜日 午後１時５０分