Mitsubishi MOTORS Outlander PHEV 2018, Руководство пользователя

Страница: 56 / 457

Charging troubleshooting guide
General information/Charging 3-37
3
Normal charging cannot be
started. There is no electrical power coming
from the outlet. Confirm that there has not been a power failure. Make sure the breaker is
on. If an outlet with a timer device installed is used, power will only be
available at the time set by the timer.
Confirm if the POWER indicator on the control box is illuminated.
The charge connector is not con-
nected correctly. Confirm the charge connector is connected correctly.
The charge connector was connected
and disconnected repeatedly in a
short time. Disconnect the charge connector, wait for a while, then start charging pro-
cedure again from the beginning.
A charging cable for other vehicle is
used. Use the EV charging cable only for your vehicle.
The normal charger may not be com-
patible with your vehicle. Ask an administrator or the manufacturer of the normal charger whether
the charger is compatible with your vehicle. Always follow the instruc-
tions shown on the normal charger.
Reservation of charging timer is set
up by MITSUBISHI Remote Control
(if so equipped) or the Smartphone
Link Display Audio. The normal charging cannot be started when the EV charging cable is con-
nected, if the charging timer is set. Cancel all the charging timer settings,
if you want to start the normal charging immediately.
Refer to “MITSUBISHI Remote Control” on page 3-42.
For the Smartphone Link Display Audio, refer to the separate owner’s
manual.
Symptom Possible cause Possible solution
BK0254400US.book 37 ページ ２０１７年８月１０日 木曜日 午後１時５０分