Mitsubishi MOTORS Outlander PHEV 2018, Руководство пользователя

Страница: 159 / 457

Power window control
5-38 Features and controls
5
N00510601144
Use the following procedure to test the sys-
tem:
1. Lower the driver’s window.
2. Arm the system as explained in “Armed
stage”.
3. Make sure that the theft-alarm indicator
comes on and flashes for approximately
20 seconds.
4. Wait a few seconds and then unlock the
driver’s side door by using the inside door
lock knob. Open the door.
5. Make sure that the horn (the siren for
vehicles equipped with the interior alarm
sensor) sounds intermittently and the
headlights blink when a door is opened.
6. Disarm the system by unlocking all doors
and the liftgate by using the keyless entry
system or the F.A.S.T.-key operation.
N00510801423
 The amount of time after unlocking until the
vehicle relocks automatically can be
adjusted. See a certified Mitsubishi EV
dealer for details.
On a vehicle equipped with the Smartphone
Link Display Audio, the functions can be
adjusted on the screen. For details, refer to a
separate owner’s manual.
 Once the system has been disarmed, it can-
not be rearmed except by repeating the arm-
ing procedure.
Testing the theft-alarm system
NOTE
Power window control
1- Open (down)
2- Close (up)
NOTE

Never try to operate the main switch and
sub-switch in different directions at the same
time. This will freeze the window in posi-
tion.
 Operating the power windows repeatedly
with the Plug-in Hybrid EV System stopped
will run down the 12 V starter battery. Use
the window switches only while the Plug-in
Hybrid EV System is operating.
WARNING
 Before operating the power windows,
make sure that nothing can be trapped
(head, hands, fingers, etc.) in the window.
 Never leave the vehicle without carrying
the key.
 Never leave children or unreliable adults
unattended inside the vehicle.
BK0254400US.book 38 ページ ２０１７年８月１０日 木曜日 午後１時５０分