Mitsubishi MOTORS Outlander PHEV 2018, Руководство пользователя

Страница: 413 / 457

For cold and snowy weather
9-22 Vehicle care and maintenance
9
 The underside or rear of the vehicle is
damaged
Also check the exhaust system each time the
vehicle is raised for lubrication, oil changes,
or required service. Any open seams or loose
connections could let dangerous exhaust
fumes seep into the luggage and passenger
compartments.
 Check for holes or exhaust gas leaks
caused by corrosion or damage.
 Check the joints and connections for
looseness or exhaust gas leaks.
 Check the rubber hangers and brackets for
damage.
N00942300079
The timing belt should be replaced with a
new one at the mileage listed in the “WAR-
RANTY AND MAINTENANCE MAN-
UAL”.
N00942501124
The hood lock release mechanism and hood
safety catch should be checked, cleaned, and
oiled when needed for easy movement and to
prevent rust and wear. Use Multipurpose
Grease NLGI Grade 2 sparingly for all sliding
parts of the hood latch and release lever.
Work the grease into the hood lock mecha-
nism until all the movable surfaces are cov-
ered.
Also, put a light coat of the same grease on
the safety catch wherever moving parts touch.
N00942600102
The ventilation slots in front of the wind-
shield should be brushed clear after a heavy
snowfall so that the operation of the heating
and ventilation systems will not be impaired.
To prevent freezing of the weatherstripping
on the doors, engine hood, etc., they should
be treated with silicone grease.
It is a good idea to carry a shovel or a short-
handled spade in the vehicle during the win-
ter so that you can clear away snow if you get
stranded. A small hand-brush for sweeping
snow off the vehicle and a plastic scraper for
the windshield, side and rear window are also
useful.
N00942701331
The fusible links will melt to prevent a fire if
a large current attempts to flow through cer-
tain electrical systems.
In case of a melted fusible link, see a certified
Mitsubishi EV dealer for inspection and
replacement.
For the fusible links, please refer to “Fuse
load capacities” on page 9-24.
Check for any of the following
conditions:
Timing belt
Hood lock release mechanism
and safety catch
For cold and snowy weather
Ventilation slots
Weatherstripping
Additional equipment (For
regions where snow is encoun-
tered)
Fusible links
BK0254400US.book 22 ページ ２０１７年８月１０日 木曜日 午後１時５０分