Mitsubishi MOTORS Outlander PHEV 2018, Руководство пользователя

Страница: 202 / 457

Cruise control (if so equipped)
Features and controls 5-81
5
Push down and hold the SET - switch (B)
while driving at the set speed, and your speed
will slow down gradually.
When you reach your desired speed, release
the switch. Your new cruising speed is now
set.
To slow down your speed in small amounts,
push down the SET - switch (B) for less than
approximately 1 second and release it.
Each time you push down the SET - switch
(B), your vehicle will slow down by approxi-
mately 1 mph (1.6 km/h).
While driving at the set speed, use the brake
pedal, which disengages the cruise control,
then push down the SET - switch (B) and
release the switch momentarily to set a new
desired cruising speed.
N00541701095
Depress the accelerator pedal as you would
normally. When you release the pedal, you
will return to your set speed.
SET - switch Brake pedal To temporarily increase or
decrease the speed
To temporarily increase the speed
NOTE
 In some driving conditions, the set speed
driving may be deactivated. If this happens,
refer to “To activate” on page 5-79 and
repeat the speed setting procedure.
BK0254400US.book 81 ページ ２０１７年８月１０日 木曜日 午後１時５０分