Mitsubishi Electric MR-J2S-10CP, Инструкция по эксплуатации

Страница: 197 / 357

7 - 16
7. DISPLAY AND OPERATION
7.6.2 Operation example
(1) Parameter of 5 or less digits
The following example shows the operation procedure performed after power-on to change the home
position setting method (Parameter No.8) into the data setting type. Press "
MODE
" to switch to the
basic parameter screen.
Press four times. Select parameter No.8 with UP DOWN. or MODE
The parameter number is displayed.
UP DOWN or Press to change the number.
SET Press twice.
The set value of the specified parameter number flickers.
UP Press twice.
During flickering, the set value can be changed.
UP DOWN
or
Use .
SET Press to enter.
( 2: Data setting type)
To shift to the next parameter, press the "
UP
" or "
DOWN
" button.
When changing the parameter No.8 (home position return type) setting, change its set value, then
switch power off once and switch it on again to make the new value valid.