Mitsubishi Electric ME96SSRA-MB, Руководство пользователя

Страница: 13 / 109

12
1. Display and Button Functions of Each Parts
Display
Note: The above display is an example for explanation.
No.
Segment Name Description
1 LEAD status They show direction of Power Factor or Reactive Power on bar graph.
They show the type of counting of Reactive Energy on Reactive Energy Display. 2 LAG status
3 Scale of the bar graph They show the scales of the bar graph.
4 Under scale input Turns on when measuring values fall below the minimum scale.
5 Over scale input Turns on when measuring values exceed the maximum scale.
6 Index indicator When upper/lower limit alarm set, flickers at the limit setting value.
7 Bar graph status
They show the item expressed with the bar graph.
When the item is the same as a digital displayed item, indicated with
「 」
,
otherwise indicated with
「 」
8 Phase status They show the phase for each of the digital displays.
9 Digital display Measured values displayed in digital.
10 Unit Units of measuring value displayed.
11 Metering status Flickers when counting active energy.(Note.1)(only active energy imported display)
12 Harmonics Turns on when harmonics displayed.
13 Setup status
Turns on at setting mode. ( )
Flickers at setting value confirmation mode. ( )
14 Test mode status Turns on at the test mode.
15 Clock status Turns on when Operation time displayed.
16
Upper/lower limit alarm
status
Flickers when upper/lower limit alarm is generated.
17
Communication or Logging
status
Specification On Blinking Off
CC-Link communication Normal
CC-Link version mismatch
Hardware error
Hardware error
MODBUS
®
RTU communication
MODBUS
®
TCP communication
Normal
Communication error
(Such as wrong address)*1
Hardware error
Logging function Normal
Error such as incorrect
setting, SD memory card
error, low battery voltage)*1
Hardware error
*1. For details, refer to Section 6.6.(page86).
Note 1. The blinking cycle is constant regardless of the size of the measured input.
4
7
8
6
11
10
3
5
3
9
16
1 2
13 14 15 17 12