Mitsubishi Electric ME96SSRA-MB, Руководство пользователя

Страница: 32 / 109

3. Setting
31
3.6. Setting Menu 3: Display Settings (Setting Maximum Scale, Active Energy Measurement,
and Harmonic Display, etc.)
This section shows how to set maximum scale in the bar graph, expanded counting, and harmonics display.
In the operation mode, press and simultaneously for 2 seconds or more, and the following operation
becomes available.
SET RESET
Set the setting menu number to "3".
(as shown in the right figure)
Setting menu
Set the maximum scale of Reactive power.
If you have not set reactive power to “Display pattern”, this
display
will be skipped.
The setting method is the same as
③
active power maximum scale.
Reactive power is only “double deflection”.
④
Reactive power
maximum scale
SET DISPLAY
SET DISPLAY
SET DISPLAY
SET DISPLAY
SET DISPLAY
Set the current maximum scale.
If you have not set current to “Display pattern”, this display menu will be skipped.
(1)Maximum scale value
Primary Current
(1.4.1Primary Current Setting value)
SP.(Special Setting)
(2)Special current maximum scale
This display is displayed when you set the "SP" in 3.1.
+ 3 STEP (About 120%)
to
± 0 STEP (100% : Rating)
to
-10 STEP (About 40%)
Note: The maximum scale value becomes the value in the table on Section 6.3.(page 80 and after).
①
Current maximum
scale
＋ －
Set the voltage maximum scale.
If you have not set voltage to “Display pattern”, this display menu will be skipped.
Maximum scale value
+10 STEP (About 250%)
to
± 0 STEP (100% :
Standard maximum scale value )
to
-18 STEP (About 20%)
Note: The maximum scale value becomes the value in the table on Section 6.3.(page 80 and after).
②
Voltage maximum
scale
＋ －
Set the maximum scale of Active power, Rolling demand.
If you have not set active power and rolling demand to “Display pattern”,
this display will be skipped. And, if selected not Active power but rolling demand,
“(2)single deflection/ double deflection” will be skipped.
(1)Maximum scale value
+3 STEP (About 120%)
to
±0 STEP (100% : Rating)
to
-18 STEP (About 20%)
Note: The maximum scale value becomes the value in the table on
Section 6.3.(page 80 and after).
(2)single deflection / double deflection
③
Active power
maximum scale
＋ －
single deflection double deflection
SET DISPLAY