Mitsubishi Electric ME96SSRA-MB, Руководство пользователя

Страница: 103 / 109

102
Specifications
2. Applicable Standards
Electromagnetic Compatibility
Emissions
Radiated Emission
EN61326-1/CISPR 11
，
FCC Part15 Subpart B Class A
Conducted Emission
EN61326-1/CISPR 11
FCC Part15 Subpart B Class A
Harmonics Measurement EN61000-3-2
Flicker Meter Measurement EN61000-3-3
Immunity
Electrostatic discharge Immunity EN61326-1/EN61000-4-2
Radio Frequency Electromagnetic field Immunity EN61326-1/EN61000-4-3
Electrical Fast Transient/Burst Immunity EN61326-1/EN61000-4-4
Surge Immunity EN61326-1/EN61000-4-5
Conducted Disturbances, Induced By Radio Frequency Fields Immunity EN61326-1/EN61000-4-6
Power Frequency Magnetic Field Immunity EN61326-1/EN61000-4-8
Voltage Dips and Short Interruptions EN61326-1/EN61000-4-11
Safety
Europe CE, as per EN61010-1
U.S. and Canada cRUus as per UL61010-1, IEC61010-1
Installation Category
Ⅲ
Measuring Category
Ⅲ
Pollution Degree 2
3. Specifications of MODBUS
®
RTU Communication
Item Specifications
Physical interface RS
－
485 2wires half duplex
Protocol RTU (Binary data)
Synchronization method Start-stop synchronization
Network topology Daisy-chain
Baud rate 2400, 4800, 9600, 19200, 38400bps
Data bit 8
Stop bit 1, 2
Parity Odd, Even, None
Slave address 1 to 255 (0
：
For broadcast)
Distance 1200m
Maximum Number 31
Response time 1s or less (time to a response after receiving a query)
Terminate
120Ω
1/2W
Recommended cable Shielded twisted pair, AWG24 to 14 gauge

About Programming
In addition to this manual, read the following documents too.

Electronic Multi-Measuring Instrument ME Series MODBUS® Interface specifications ..................................... LSPM-0075
4. Specifications of CC-Link Communication
Item Specifications
CC-Link station type Remote device station (ver.1 remote device station or ver.2 remote device station)
Number of occupied stations Ver.1 remote device station (ver.1 compatible slave station) setting: 1 station
Ver.2 remote device station (ver.2 compatible slave station) setting: 1 station (Expanded
cyclic setting: Octuple)
CC-Link version CC-Link Ver 1.10 / 2.00
Transmission speed Can select from 156kbps / 625kbps / 2.5Mbps / 5Mbps / 10Mbps
Maximum number of connected
stations If the system is configured by only this instrument, up to 42 units can be connected.
(note1)

CC-Link Dedicated Cable
Use the CC-Link dedicated cables for the CC-Link system. If a cable other than the CC-Link dedicated cable is used, the
performance of the CC-Link system cannot be guaranteed.
For the specifications of the CC-Link dedicated cables or any other inquiries, visit the following website:
CC-Link Partner Association:
http://www.CC-link.org/
REMARK
For details, refer to the CC-Link cable wiring manual issued by CC-Link Partner Association.

About Programming
In addition to this manual, read the following documents too.

Electronic Multi-Measuring Instrument programming manual (CC-Link) ............................................................ LEN080334

Electronic Multi-Measuring Instrument programming manual (CC-Link)(For ver. 2 remote device station)......... LEN130391
Note1: As for details, refer to the above manuals.