Mitsubishi Electric D75D4, Руководство пользователя

Страница: 718 / 896

Appendix - 2
MELSEC-Q
APPENDICES
Appendix 1 Version up of the functions
Appendix 1.1 Comparison of functions according to function versions
The following tables list the QD75 functions compared according to function versions
and the buffer memory for their additional functions.
(1) Function comparison
Item
Function versions
Reference
QD75P N/
QD75D N
QD75P /QD75D
A A B
Speed-position switching control
(ABS mode)
Section 9.2.19
Pre-reading start function Section 12.7.7
External I/O signal monitor
function
1 2
Section 13.5
Multiple programmable controller
compatible function
3

Deceleration start flag function
4
Section 12.7.8
Stop command processing for
deceleration stop function
5
Section 12.7.9
Output timing selection of near
pass control
6
7
Section 12.3.4
3-axis helical interpolation control
8
Section 9.2.12
Section 9.2.13
Positioning option
8
Section 5.3
:Available :Not available
1: For the QD75P N/QD75D N, external I/O signals can not be monitored on GX
Developer. Use the system monitor of GX Works2.
2: Usable on GX Developer of SW6D5C-GPPW-E or later.
3: Compatible with QCPU of function version B.
4: Supported by the module whose first five digits of SERIAL No. are "03042" or later.
5: Supported by the module whose first five digits of SERIAL No. are "05072" or later.
6: Supported by the module whose first five digits of SERIAL No. are "14032" or later.
7: Supported by the module whose first five digits of SERIAL No. are "14012" or later.
8: Supported by the module whose first five digits of the serial number are "17102" or later.
GX Configurator-QP does not support these functions. Only GX Works2 (Version 1.540N
or later) supports the functions.