Mitsubishi Electric D75D4, Руководство пользователя

Страница: 704 / 896

15 - 38
MELSEC-Q
15 TROUBLESHOOTING
Classification
of errors
Error
code
Error name Error Operation status at error occurrence
Parameter
954
Deceleration time 2
setting error
The set value of the detailed parameter
2 "Deceleration time 2" is outside the
setting range.
At start: The system will not
operate.
During operation:
The system stops with the
setting (deceleration
stop/sudden stop) of the
detailed parameter 2
Sudden stop selection
(stop group 3).
(Note that the deceleration stop only
occurs during the manual pulse
generator operation.)
955
Deceleration time 3
setting error
The set value of the detailed parameter
2 "Deceleration time 3" is outside the
setting range.
956
JOG speed limit
value error
• The set value of the detailed
parameter 2 "JOG speed limit value"
is outside the setting range.
• The set range of the detailed
parameter 2 "JOG speed limit value"
exceeds the speed limit.
957
JOG acceleration
time selection setting
error The set value of the detailed parameter
2 "JOG acceleration time selection
setting" is outside the setting range.
958
JOG deceleration
time selection setting
error The set value of the detailed parameter
2 "JOG deceleration time selection
setting" is outside the setting range.
959
Acceleration/
deceleration process
selection setting
error The set value of the detailed parameter
2 "Acceleration/deceleration process
selection setting" is outside the setting
range.
960
S-curve ratio setting
error
The set value of the detailed parameter
2 "S-curve ratio" is outside the setting
range.
961
Illegal sudden stop
deceleration time
The set value of the detailed parameter
2 "Sudden stop deceleration time" is
outside the setting range.
962
Stop group 1 sudden
stop selection error
The set value of the detailed parameter
2 "Stop group 1 sudden stop selection"
is outside the setting range.
963
Stop group 2 sudden
stop selection error
The set value of the detailed parameter
2 "Stop group 2 sudden stop selection"
is outside the setting range.
964
Stop group 3 sudden
stop selection error
The set value of the detailed parameter
2 "Stop group 3 sudden stop selection"
is outside the setting range.
966
Outside allowance
circular interpolation
error width The set value of the detailed parameter
2 "Allowance circular interpolation error
width" is outside the setting range.
967
External command
function selection
error The set value of the detailed parameter
2 "External command function
selection" is outside the setting range.
980 OPR method error
The set value of the OPR basic
parameter "OPR method" is outside
the setting range.
The QD75 READY signal (X0) is not
turned ON.