Mitsubishi Electric CITY MULTI PUMY-P200YKM3, Руководство по обслуживанию

Страница: 117 / 127

OCH791 _117
: Switch the airflow direction and start the test run.
: Switch the louver and start the test run.
: Start the test run.
3. Stop the test run.
• Press the button to stop the test run.
• After 2 hours, the stop signal is transmitted.
13-4-4. PAR-U02MEDA
Operating instructions
• Read the section about Test run in the indoor unit Installation Manual before performing a test run.
• During the test run, indoor units will be forced to operate in the Thermo-ON status.
Except the set temperature, normal operation functions are accessible during test run.
• By selecting the address of another indoor unit, the liquid pipe temperature of the selected unit can be monitored.
• The test run will automatically end in 2 hours.
Notes:
• When AHC is controlled from the controller
To monitor the operating status of AHC, touch the [<] button on the [Test run] screen and access the [General equip-
ment] screen.
• To set the humidity setting for the humidifier (when one is connected to the AHC), touch the [>] button on the [Indoor
unit setting] screen.
Cool
Mode
ON
00
1
Pipe
9.0°C
[MON] 10:45 Test run
Address Remain 2:00
＞
＞
＞
＞
LED
-
+
Test run
Fan speed
Auto Swing
High
On
Louver LOSSNAY
Air direction
＞
＞
＞ ＞
＞
＞
＞ ＞
[Test run screen] [Indoor unit setting screen]
13-5. Function setting
13-5-1. PAR-41MAA
Operating instructions
1. Open the function setting screen.
• Select ˝Service˝ from the main menu, and press the [ ] button.
• Select ˝Setting˝ from the service menu, and press the [ ] button.
• Select ˝Function setting˝ and press the [ ] button.
Function setting screen will appear.