Mitsubishi Electric CITY MULTI PUMY-P200YKM3, Руководство по обслуживанию

Страница: 11 / 127

OCH791 _11
4 SPECIFICATIONS
Model PUMY-P200YKM3(-BS) PUMY-P200YKM3-ER(BS) PUMY-P200YKM3-ET(BS)
Power source 3-phase 380-400-415 V, 50Hz
Cooling capacity (Nominal)
*1
kW 22.4
kcal/h 19,300
Btu/h 76,400
Power input kW 7.18
Current input A 11.73 - 11.15 - 10.75, 11.73 - 11.15
COP kW/kW 3.12
Temp. range of
cooling
Indoor W.B. 15 to 24°C / 59 to 75°F
Outdoor D.B. -5 to 52°C / 23 to 126°F
Heating capacity (Nominal)
*2
kW 25.0
kcal/h 21,500
Btu/h 85,300
Power input kW 5.85
Current input A 9.56 - 9.08 - 8.76,
9.56 - 9.08
COP kW/kW 4.27
Temp. range of
heating
Indoor D.B. 15 to 27°C / 59 to 81°F
Outdoor W.B. -20 to 15°C / -4 to 59°F
*3 *4
Indoor unit
connectable
Total capacity 50 to 130% of outdoor unit capacity
Model/ Quantity CITY MULTI P10 - P200/12
Branch box kW type: P15–P100/8
Mixed
system
Branch box
1 unit
CITY MULTI P10–P200/5
Branch box kW type: P15–P100/5
Branch box
2 units
CITY MULTI P10–P200/3
Branch box kW type: P15–P100/8
Sound pressure level (SPL)
(measured in anechoic room)
dB <A>
57/61
Sound power level (PWL)
(measured in anechoic room)
dB <A>
76/80
Refrigerant piping
diameter
Liquid pipe mm (in) 9.52 (3/8), Flare
Gas pipe mm (in) 19.05 (3/4), Flare
Fan Type × Quantity Propellar Fan × 2
Airflow rate m³/min 139/141
L/s 2,317/2,350
cfm 4,909/4,979
Control, Driving mechanism DC contorol
Motor output kW 0.20 + 0.20
External static press. 0 Pa
Compressor Type × Quantity scroll hermetic compressor× 1
Manufacturer Siam Compressor Industry Co., Ltd.
Starting method Inverter
Capacity control % Cooling 25 to 100
Heating 17 to 100
Motor output kW 5.3
Case heater kW 0
Lubricant FVC68D (2.3liter)
External finish Galvernized Steel Sheet Munsell No. 3Y 7.8/1.1
External dimension H × W × D mm 1,338 × 1,050 × 330 (+40)
in 52 - 11/16 × 41 - 11/32 × 13 (+1 - 10/16)
Protection
devices
High pressure protection High Pressure Switch
Inverter circuit (COMP./FAN) Overcurrent detection, Overheat detection (Heat sink thermistor)
Compressor Compressor thermistor, Overcurrent detection
Fan motor Overheating, Voltage protection, Overcurrent detection
Refrigerant Type × original charge R410A × 7.3kg (16.1lbs)
Control Linear expansion valve
Net weight kg (lb) 141 (311)
Heat exchanger Cross Fin and Copper tube
HIC circuit (HIC: Heat Inter-Changer) HIC circuit
Defrosting method Reversed refrigerant circuit
Drawing External RK01B689
Wiring BH79N143
Standard
attachment
Document Installation Manual
Accessory Grounded lead wire × 1
Optional parts Joint: CMY-Y62-G-E, Header: CMY-Y64/68-G-E, Branch box: PAC-MK34/54BC
Remarks
*1. Nominal cooling conditions:
Indoor: 27°C D.B./19°C W.B. [81°F D.B/66°F W.B.]
Outdoor: 35°C D.B. [95°F D.B.]
Pipe length: 7.5 m [24-9/16 ft]
Level difference: 0 m [0 ft]
*2. Nominal heating conditions:
Indoor: 20°C D.B. [68°F D.B.]
Outdoor: 7°C DB/6°C W.B. [45°F D.B./43°F W.B.]
Pipe length: 7.5 m [24-9/16 ft]
Level difference: 0 m [0 ft]
*3. 10 to 52°C D.B. [50 to 126°F D.B.], when connecting following models: PKFY-P10/15/20/25/32VLM, PFFY-P20/25/32VLEM, PFFY-P20/25/32VL-
RM(M), PFFY-P20/25/32VKM, PFFY-P20/25/32VCM, PFFY-P20/25/32VEM; and M series, S series, and P series type indoor unit.
*4. −15 to 52°C D.B. [50 to 126°F D.B.], when using an optional air protect guide [PAC-SH95AG-E]. However, this condition does not apply to the indoor
unit listed in *3.
Notes:
• Nominal conditions *1, *2 are subject to ISO 15042.
• Due to continuing improvement, above specifications are subject to change without notice.
• See the following for unit conversion: kcal/h = kW × 860, Btu/h = kW × 3,412, cfm = m³/min × 35.31, lb = kg/0.4536
Above specification data is subject to rounding variation.