Mitsubishi Electric AG-150A Скачать руководство пользователя страница 4

Страница: 4 / 116

– 3 –

3. Product features

The controller described in this manual is a centralized controller that can be operated over the Web.

Any connected air conditioning systems can be operated or monitored directly from the controller or over the Web using

browser software.

Refer to the Web browser operation manual (separate volume) for how to use this functions.

Function

Description

Number of

controlled unit

Indoor unit, Ventilation unit

(LOSSNAY and OA handling unit),

DIDO controller, Air To Water

(PWFY), HWHP (CAHV)

Up to 150 units are connectable (including the interlocked units) *2

By connecting three PAC-YG50ECA Expansion controllers (sold separately), a maximum of 150

units of equipments can be controlled. Each DIDO controller (PAC-YG66DCA) contact counts as

one unit.*4

Number of units in one group

(indoor, independent OA

processing unit, or LOSSNAY,

HWHP (CAHV))

1-16 units (Indoor unit, independent OA processing unit, ventilation system (LOSSNAY), and DIDO

controller cannot be registered to the same group.) *6

Number of remote controllers in

one group

1-2

Number of system controllers in

one group

0-4 (including the number of remote controller in one group)

Number of interlocked LOSSNAY

units

• Number of LOSSNAY units that can be interlocked with an indoor unit: 1

• Number of indoor units that can be interlocked with a LOSSNAY unit: 16

er O

peration

tio

Operation

ON/OFF

The ON/OFF operation can be performed as a collective, per group, or per block.

Operation mode

The switch operation for the operation mode setting can be performed as a collective, per group,

per block, per floor, or per building. (Available modes depend on the model of indoor units.)

[Selectable operation mode for the indoor unit]

COOL/DRY/FAN/AUTO/HEAT

[Selectable operation mode for the independent ventilation]

HEAT RECOVERY/BY-PASS/AUTO

[Selectable operation mode for Air To Water (PWFY) and HWHP (CAHV)]

HEATING/HEATING ECO/HOT WATER/ANTI-FREEZE

COOLING (for Air To Water (PWFY))

Fan speed

Up to four fan speeds are available. Fan speed can be changed collectively, or for each group or

block of indoor units. (The number of available fan speeds depends on the indoor model (2 speeds,

3 speeds, 4 speeds, and Auto). “Auto” is available only on the models that support that function.)

Temperature setting

Temperature setting can be performed collectively, per group, or per block.

[Setting temperature range for air conditioner]

Cool (Dry) operation:

19 ~ 30°C / 67 ~ 87°F

Heat operation:

17 ~ 28°C / 63 ~ 83°F

Auto operation:

19 ~ 28°C / 67 ~ 83°F

[Setting temperature range for Air To Water (PWFY)]
[Booster unit]

Heating:

30 ~ 50°C/87 ~ 122°F

Heating ECO: 30 ~ 45°C/87 ~ 113°F

Hot Water:

30 ~ 70°C/87 ~ 158°F

Anti-freeze:

10 ~ 45°C/50 ~ 113°F

Cooling:

Invalid

[Setting temperature for HWHP (CAHV)]

Heating:

25 ~ 70°C/77 ~ 158°F

Heating ECO: Invalid

Hot Water:

25 ~ 70°C/77 ~ 158°F

Anti-freeze:

Invalid

[Water HEX unit]

Heating:

30 ~ 45°C/87 ~ 113°F

Heating ECO: 30 ~ 45°C/87 ~ 113°F

Hot Water:

Invalid

Anti-freeze:

10 ~ 45°C/50 ~ 113°F

Cooling:

10 ~ 30°C/50 ~ 87°F

Air direction and swing operation

Vertical air flow directions (5 directions), auto setting, and swing setting can be changed collectively,

or for each group or block of indoor units. (Available air flow directions depend on the model. [5 air

flow directions and AUTO] are available only on the models that support those settings.

Fan mode (HWHP (CAHV))

The fan mode of HWHP (CAHV) units can be switched between Normal and Snow.

Operating/stopping interlocked

LOSSNAY units

Interlocked LOSSNAY units (if any) can be operated (at High or Low) or stopped collectively or for

each group or block of indoor units. (Ventilation mode cannot be selected for the interlocked

LOSSNAY units.)

Schedule*5

Group is the smallest unit to which a weekly schedule can be assigned. The same schedule can be

applied collectively, or to each group, groups in a block, or groups on a floor.

• Up to 24 events can be scheduled for each day.

• “ON/OFF”, “Operation mode”, “Temperature Setting”, “Fan Speed Setting”, “Vane Setting”, and

“Prohibition of operation from local remote controller” can be timer-controlled.

If a license is registered

• Five types of weekly schedule patterns are available.

• Five operation patterns (A-E) can be set for each year, up to 50 days can be allocated to each

pattern.

• When Optimized startup schedule is set, the operation starts so that the preset temperature is

reached at the preset time. (Applicable to indoor units only)

Schedule

Available/Not Available

Schedule settings can be Available or Not Available for each group, block, floor, or for all units

collectively.

Prohibit local remote control

Operation of certain functions from the local remote controllers can be prohibited collectively or for

each group or blocks of indoor units.

(Applicable functions: ON/OFF, operation mode, temperature setting, filter sign, Water circuit sign

(Air To Water (PWFY)))

Filter sign reset

Filter sign can be reset for each group or block of indoor units.

Water circuit sign reset

(Air To Water (PWFY))

Water circuit sign (Air To Water (PWFY)) can be reset for each group or block of indoor units.

Error reset

Resets the display of error.

Error history reset

Resets the error history (unit error, communication error).

WT05369X15.book Page 3 Wednesday, November 7, 2012 10:33 AM

Содержание AG-150A





















































































































Результаты поиска

Содержание AG-150A

Отзывы:

Похожие инструкции для AG-150A

Бренды по названию

Популярные бренды

Mitsubishi Electric AG-150A, Инструкция

Результаты поиска

Содержание AG-150A

Отзывы:

Похожие инструкции для AG-150A

Бренды по названию

Популярные бренды