Mitsubishi Electric AG-150A Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 116

background image

– 41 –

6-3-2

Setting the schedule with a registered license

When a license (PIN CODE) is registered, it is possible to set different weekly (5 types)/annual/today’s schedules for each air conditioner
group. Moreover, for any weekly/annual/today’s schedule run for a particular day, the priority in which it is run will be from the highest and
the order will be [Today’s], [Annual], [Weekly 1], [Weekly 2], [Weekly 3], [Weekly 4], [Weekly 5]. Five types of weekly schedule can be set.

6-3-2-1 Setting the Weekly Schedule

Touch the menu item [Schedule Settings] and touch [Weekly 1] - [Weekly 5] in the sub menu to display the Weekly Schedule setting
screen. To set a weekly schedule, you first must select what will be the target of this schedule and then set the schedule details from
Sunday right through to Saturday.
Note: If today's schedule has been set, it will override the scheduled settings for the date in the weekly schedule.
Note: When the contents of an operation are executed as part of a schedule these contents will continue to be in effect until they are

changed by a schedule or browser etc. Therefore, if you are setting a schedule that is only for a particular day, be sure to set
your schedule in a way that will not impact on the next day’s operation.
For example, if you wish to prohibit operations being performed from the remote controller after 17:00, set a Prohibit operation
for 17:00 and set an Enable operation for 23:59.

Note: The weekly schedules of the groups whose schedule settings are Not Available from the control screen will not be executed.

(Refer to section 6-2.)

*For a system connected to TG-2000A Ver. 6.36 or before, only [Weekly 1] and [Weekly 2] are available.
*If the Season setting is set to “Not Available” on the Advanced settings screen, the Weekly schedule settings cannot be valid.

(1) Select the schedule to set.

(2) Select the type of schedule settings to make.

Select the type of schedule settings to make by referring to Section 1 above under “Select the type of schedule settings to
make.”

Select one of the sub menus [Weekly 1] through [Weekly 5].
(Five types of weekly schedule patterns are available if the license is
registered.)

When HWHP (CAHV) units are connected, the [HWHP] tab will be
displayed on the sub menus [Weekly1] - [Weekly5] along with the
[Floor] and [Block] tabs. Selecting the [HWHP] tab will display the
information about the HWHP (CAHV) units only.

Weekly 1 Floor display

Weekly 1 HWHP (CAHV) display

WT05369X15.book Page 41 Wednesday, November 7, 2012 10:33 AM

«
...
40
41
42
43
44
...
»

Содержание AG-150A





















































































































Отзывы:

Нет отзывов

Похожие инструкции для AG-150A

EVOLUTION Series

Бренд: C&H Страницы: 39

Бренд: Zamil Страницы: 20

Бренд: Danby Страницы: 36

Бренд: GE Страницы: 56

Бренд: Daewoo Страницы: 60

Бренд: Lennox Страницы: 32

Бренд: GE Страницы: 48

CO2 Conveni-Pack

Бренд: Daikin Страницы: 80

DOLCECLIMA AIR PRO 14HP

Бренд: Olimpia splendid Страницы: 92

Бренд: Daikin Страницы: 21

Mini Amazon III

Бренд: Kaysun Страницы: 140

Бренд: IMI Страницы: 39

Бренд: Rasonic Страницы: 28

Бренд: Daikin Страницы: 26

Бренд: Olimpia splendid Страницы: 144

Бренд: Daikin Страницы: 88

Бренд: Daikin Страницы: 48

Бренд: Haier Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды