– 67 –
(4) In the [Monitor] section, select whether to display I/P to or from the general equipment on the monitor screen.
(5) Press the [Save setting] on the group setting screen to save the settings.
7-7-4
Registering general equipment in the group for a system with connection to an Expansion controller
(PAC-YG50ECA)
From the menu bar on the Setting change screen, touch [Initial Settings] > [Groups] to see the group settings screen. Select the tab that
corresponds to the EC whose settings are to be made, and make the settings for the air conditioning units, general equipment groups,
and group names.
Note: If the user logs in as a building manager, some of the operations may be prohibited.
Note: Each contact point on the DIDO controller (PAC-YG66DCA) is counted as one unit. Up to 50 units can be connected the controller
for each EC connected.
Note: Air-conditioners and general equipment cannot be in the same group.
Note: Remote controllers or system controllers cannot be connected to general equipment.
Note: Devices that are connected to different Expansion controllers cannot be grouped together.
Refer to sections 7-7-1 (P 64), 7-7-2 (P 64), and 7-7-3 (P 66) for the details of how to make the settings for the group names, air
conditioning groups, and general equipment groups.
CAUTION
Be sure to make the settings while the Expansion controller is connected. (Those settings made without the connection of an
Expansion controller will not be reflected.)
General equipment
display setting
button
Remote controller
selection button
System controller
selection button
Save Setting button
Group No.
Group numbers will
be displayed here
Group Name
Input button
Unit selection button
WT05369X15.book Page 67 Wednesday, November 7, 2012 10:33 AM
