Mitsubishi Electric AG-150A Скачать руководство пользователя страница 66 | Manualshive

Страница: 66 / 116

background image

– 65 –

(2) To change the icons, touch the icon selection button, and select the desired icon from the ones that appear.

(3) To register a remote controller to a group, touch the remote controller selection button to bring up the remote controller selection

screen, and then touch the numbers that are assigned to the units to resister. An orange frame will appear around the selected items.
Touch again to deselect the selected items. Touch again to deselect the selected item (no orange frame). Press the [OK] button to
save the changes, or touch the [Cancel] button to go back to the previous screen without saving any changes.
Note: A maximum of 2 remote controllers can be registered in one group.
Note: MA remote controllers do not need to be registered to a group.
* Only one remote controller can be connected to a system to which three system controllers are connected. No remote controllers

can be connected to a system to which four system controllers are connected. (The maximum connectable number is four including
system controllers.)

* The remote controllers that are registered to another group will be grayed out and not available for selection.

(4) To register a system controller to a group, touch the system controller selection button to bring up the system controller selection

screen, and then touch the numbers that are assigned to the unit to resister. An orange frame will appear around the selected items.
Touch again to deselect the selected items. Touch again to deselect the selected item (no orange frame). Press the [OK] button to
save the changes, or touch the [Cancel] button to go back to the previous screen without saving any changes.
Note: The combined number of system controllers and remote controls cannot exceed four.
Note: K-transmission converters do not need to be registered.

Item selection frame

An orange frame
appears around the
selected unit(s).

WT05369X15.book Page 65 Wednesday, November 7, 2012 10:33 AM

«
...
64
65
66
67
68
...
»

Содержание AG-150A





















































































































Отзывы:

Нет отзывов

Похожие инструкции для AG-150A

Бренд: Samsung Страницы: 14

Бренд: Samsung Страницы: 16

Бренд: Samsung Страницы: 16

Бренд: Samsung Страницы: 43

Бренд: Samsung Страницы: 26

Бренд: Samsung Страницы: 34

Бренд: Samsung Страницы: 26

Бренд: Samsung Страницы: 36

Бренд: Samsung Страницы: 26

Бренд: Samsung Страницы: 40

Бренд: Samsung Страницы: 24

AJ009JNNDCH FJM series

Бренд: Samsung Страницы: 118

Бренд: Samsung Страницы: 34

Бренд: Samsung Страницы: 16

Super Multi NX FTXG25JV1BW

Бренд: Daikin Страницы: 26

SUPER MULTI NX CTXS07JVJU

Бренд: Daikin Страницы: 34

Super Multi NX ATXS20G2V1B

Бренд: Daikin Страницы: 34

Бренд: Daikin Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды