Minolta magicolor 7300, Руководство пользователя

Страница: 209 / 248

Solving Problems—Printing Quality
201
If the problem is not resolved, even after all of the above have been
performed, contact Technical Support with the error information. See the
Service & Support Guide for a list of sources of service and support for many
areas of the world. For the most up-to-date information globally, check
www.minolta-qms.com.
The color
has a poor
reproduc-
tion or has
poor color
density. One or more of the
print units are
defective. Remove the print unit(s) and check for
damage. If damaged, replace it (them).
The Auto-Image
Density Control
(AIDC) detection
sensor is dirty. Open the front door, and then press
the AIDC sensor lever a few times .
AIDC is disabled. Check to see if AIDC Enabled is listed
on the start page.
Symptom Cause Solution