Minolta Di150f, Руководство пользователя

Страница: 143 / 167

9 Maintenance and Trouble-Shooting
9-142 Di 150f
Error Codes in Reports
Error code Problem Solution
Communication error
D.0.1,D.0.3,D.0.8 The other location does not re-
spond, the communication could
not be set up because
STOP
was pressed during dialling.
Try to send again
D.0.10 No communication could be set
up because both machines are
set to ”reception only”. Set your machine to ”transmit” or
”transmit / receive”.
D.0.12 No communication could be set
up because the machine is set to
PSTN but a PBX location was
called. Set the machine to PBX.
D.0.13 No communication could be set
up because the machine is set to
PBX but from a PSTN was called
and the access number for ex-
ternal lines is not stored. Enter the line access number.
D.0.2 The other location is busy. Try to send again
D.0.6,D.07 The other location does not re-
spond, the communication was
interrupted because
STOP
was
pressed during dialling.
Try to send again
Reception error
R.1.1 The other location did not trans-
mit because the communication
was interrupted or the ID codes
did not match.
---
R.1.2 The fax machines were incom-
patible. This is a group 3 ma-
chine.
---
R.1.4
STOP
was pressed at the re-
ceiving location.
---
R.1.5 The machine did not recognise a
Pause after the call to receive a
reception report. ---
R.2.3 Transmission was impossible
due to bad line quality.
---
R.3.1 Too many errors were reported
from the receiving location.
---
R.3.3 The transmitting machine is in-
compatible or could not read the
document.
---
R.3.4 Bad line quality disturbed the
printing of the received page.
---