Mindray DC-68, Руководство по обслуживанию

Страница: 262 / 281

C-4 Description of Self Test Items
C.1.8 Z0208 Network Interface Test

Top test item
N/A

Test content
The program informs to plug in the network cable. The program decides the existence of the wired
network adapter, and then decides whether the Ethernet works well.

Analysis to test failure
The Ethernet cannot be recognized if the information “ No network adapter found ” appears.
The network cable cannot be recognized if the information “ No network cable plugged in ”
appears.
Ethernet does not work well if the test appears
FAIL .

Suggestion to failure test
Please check the installation of the network drive if the information “
No network adapter found
”
appears.
Please check the network cable if the information “
No network cable plugged in ” appears.
It is recommended to replace PC carrier board if the test result appears FAIL .
C.1.9 Z0209 WIFI Function Test

Top test item
N/A

Test content
Decide whether the wireless network adapter exists, and then search for SSID list.

Analysis to test failure
The wireless network adapter is not recognized if the information “ No wireless device found ”
appears.
Fail to find wireless hotspots if the information “
Wireless function test fails
” appears.

Suggestion to failure test
Check whether the connection of wireless network adaptor is fixed well and wireless network
adaptor is not forbidden if the information “ No wireless device found ” appears.
Check whether there is WIFI hotspot if the information “ WIFI Function test FAIL ” appears. If there
is a hotspot, replace the wireless network adaptor.
C.1.10 Z0301 Front End Voltage Monitor Test

Top test item
MF FPGA and system monitor interconnection test

Test content
Read A12_ACDC, DP3V3, AP2V1, DP5V, AP5V7, N12V, N5V7, AP2V9, STB5V, AP3V8 on
DC-DC board and AP1V4’s voltage value via ADT7462, and decide whether they meet the
requirements.

Analysis to test failure
The drive goes wrong if the test result appears Error .
The voltage value does not meet the requirement if the test result appears FAIL .