Mindray DC-68, Руководство по обслуживанию

Страница: 97 / 281

Software Installation &Maintenance 6-7
9. Double-click the "BackToDoppler" tool in the desktop to return to the ultrasound screen.
Navigate to [ Setup ] > [ Maintenance ] > [ Setup ] and click [ Disable ms-setting ].
10. Select [ OK ] > [ Save ] to exit and power off the system.
Note: After clicking [Enable ms-setting], you can make settings for the operating system on
Windows interface. After the settings, click [Disable ms-setting] on the maintenance screen to
disable the function immediately. Otherwise, the performance or operation of the ultrasound system
may be affected.

Phone Activation
If the ultrasound system is not connected to the internet, activate Windows 10 by the phone.
1. Log on to the system with the Service account, go to [
Setup ] > [ Maintenance ] > [ Setup ] >
[ Enter Windows ], and input the password.
For details about obtaining password, please refer to ""6.4 Enter Windows".
2. Input “ cmd ” in the address column in the pop-up Windows Explorer and press [ Enter ] key.
3. Input “ slui 4 ” in the DOS prompt and press [ Enter ] key. Phone activation wizard Menu will be
displayed as below.