Mindray BeneHeart D3, Руководство оператора

Страница: 45 / 186

5-5
5.5.1 Setting Alarm Properties for All Parameters
In the main menu, select [ Alarm Setup >> ] [
→
Para. Alarm >> ] to enter the Para. Alarm setup menu, where you can
review and set alarm limits, alarm switches, alarm level and alarm recordings for all parameters.
„
When a parameter alarm is switched on, the equipment gives alarm indications in accordance with the preset alarm
level and stores related waveforms and parameter values.
„
When a parameter alarm is switched off, the alarm off symbol “ ” is displayed in the parameter window.
„
If the measurement’s [ On/Off ] and [ Record ] are set to [ On ], automatic recording of all the measurement numerics
and related waveforms is possible when a measurement alarm occurs.
To reset the default settings, select the [ Defaults ] button.
NOTE
z
You cannot simultaneously switch on HR and PR alarms. In the case that PR alarm is on, switching on HR
alarm will automatically turn off PR alarm, and vice versa.
You can also set parameter alarm properties by selecting a parameter window and select [ Para. Alarm >> ] in the
pop-up menu.
WARNING
z
Make sure that the alarm limits settings are appropriate for your patient before patient monitoring.
z
Setting the alarm limit to an extreme value may cause the alarm system to be ineffective. For example, high
oxygen levels may predispose a premature infant to retrolental fibroplasia. If this is a consideration, do NOT
set the SpO
2
high alarm limit to 100%, which is equivalent to switching the alarm off.