Mindray BeneHeart D3, Руководство оператора

Страница: 133 / 186

22-5
22.3.4.2 Routine Test
Routine Test covers the following items:
„
Batteries,
„
Mainboard,
„
Defib/Pacer function, and
„
Monitor function
If any of above items fails, the red status indicator will flash. If mainboard, Defib/Pacer function, or monitor function fails,
a low level technical alarm “Last User Test Failed” will be displayed in the technical alarm area when the equipment is
restarted. We recommend you to perform a successful User Test to clear this alarm.
22.3.4.3 Energy Delivery Test
Energy delivery test delivers a 200J external discharge to check the defibrillation circuit.
If the test fails, the red status indicator will flash and a low level technical alarm “Last User Test Failed” will be displayed in
the technical alarm area when the equipment is restarted. We recommend you to perform a successful User Test to clear
this alarm.
22.3.4.4 Controls Test
Controls test covers the following items:
„
Mode Select knob,
„
All hardkeys on the equipment’s front panel;
„
Audio test, and
„
Display test
Follow the displayed prompts to run the controls test.
NOTE
z
The tested controls are indicated in green during controls test.
If any of above items fails, the red status indicator will be illuminated and a low level technical alarm “Last User Test
Failed” will be displayed in the technical alarm area when the equipment is restarted. We recommend you to perform a
successful User Test to clear this alarm.
NOTE
z
The“Off” position of the Mode Select knob is not tested during the Controls Test. If you turn the knob to
“Off” for more than 3 seconds. The equipment is turned off.