Mindray BeneHeart D3, Руководство оператора

Страница: 165 / 186

D-1
D
Alarm Messages
This chapter lists only the most important physiological and technical alarm messages. Some messages appearing on
your equipment may not be included.
In this chapter:
„
The “I” column indicates how indications of technological alarms are cleared after the hardkey or [Audio Pause]
softkey is pressed: “A” means all alarm indications are cleared; “B” indicates alarm light and alarm tones are cleared
and the alarm messages change to prompt messages; and “C” indicates only alarm tone is disabled, but alarm light
and alarm message remain presented.
„
The “L” column indicates the alarm level: “H” refers to high, “M” refers to medium, and “L” refers to low. “*” means
the alarm level is user-adjustable.
„
XX represents a measurement or parameter label, such as ECG, HR, PVCs, RR, SpO
2
, PR, NIBP, etc.
In the “Cause and solution” column, corresponding solutions are given instructing you to troubleshoot problems. If the
problem persists, contact your service personnel.
D.1 Physiological Alarm Messages
Measurement Alarm Message L Cause and solution
XX Too High M* XX
XX Too Low M*
XX value has risen above the high alarm limit or fallen below the low alarm
limit. Check the patient’s condition and check if the patient category and
alarm limit settings are correct.
Asystole H
V-Fib/ V-Tach H
Vent. Brady H
Extreme Tachy H
Extreme Brady H
Tachy M*
Brady M*
PVC M*
R on T M*
VT>2 M*
Couplet M*
Bigeminy M*
Trigeminy M*
Missed Beats M*
Vent. Rhythm M*
ECG
Multif. PVC M*
Arrhythmia has occurred to the patient. Check the patient’s condition and
the ECG connections.