Mindray BeneHeart D3, Руководство оператора

Страница: 111 / 186

18-3
18.4.4 Changing the Recording Speed
1. Enter the [ Record Setup ] menu.
2. Select [ Paper Speed ] and toggle among [6.25 mm/s] , [12.5 mm/s] , [25 mm/s] and [50 mm/s] .
This setting is for all recordings containing waveforms.
18.4.5 Switching Gridlines On or Off
1. Enter the [ Record Setup ] menu.
2. Select [ Gridlines ] and toggle between [ On ] and [ Off ].
‹
[ On ]: show gridlines when recording waveforms..
‹
[ Off ]: hide gridlines when recording waveforms.
If [ Gridlines ] is switched on, gridlines will be printed at the waveform area.
18.5 Loading Paper
1. Use the latch at the upper right of the recorder door to pull the door open.
2. Insert a new paper roll into the compartment as shown below.
3. Close the recorder door.
4. Check if paper is loaded correctly and the paper end is feeding from the top.
CAUTION
z
Use only specified thermal paper. Otherwise, it may cause damage to the recorder’s print head, the recorder
may be unable to print, or poor print quality may result.
z
Never pull the recorder paper with force when a recording is in process. Otherwise, it may cause damage to
the recorder.
z
Do not leave the recorder door open unless you have to reload paper or remove troubles.
Recorder