Mindray BeneHeart D3, Руководство оператора

Страница: 60 / 186

6-10
6.7.3 Changing Arrhythmia Alarm Settings
To change arrhythmia alarm settings, select the ECG parameter area to enter the [ ECG Setup ] menu, and then select
[ Arrhythmia >> ]
→
[ Arrh. Alarm ] menu, where you can set alarm switch, alarm level and alarm record switch for all the
arrhythmia events..
You can also set arrhythmia alarm properties in the Configuration mode through the ECG Setup menu.
NOTE
z
The alarm level for asystole, ventricular fibrillation, ventricular tachycardia, ventricular bradycardia,
extreme bradycardia, and extreme tachycardia alarms is always high and unchangeable. These alarms are
always on. As long as the alarm condition occurs, corresponding alarm will be triggered whether arrhythmia
analysis is switched on or off.
6.7.4 Changing Arrhythmia Threshold Settings
To change arrhythmia threshold settings, select the ECG parameter window
→
[ Arrhythmia >> ]
→
[ Arrh. Threshold >> ].
In case an arrhythmia violates its threshold, an alarm will be triggered. The setting of Asystole Delay is linked to ARR
relearning. When HR is less than 30 bpm, it is recommended to set Asystole Delay to 10 seconds.
Arrh. event Range Default Step Unit
PVCs High 1 to 10 10 1 /
Asystole. Delay 2 to 10 5 1 s
Tachy 60 to 300 Adult: 120
Pediatric: 160
5 bpm
Brady 15 to 120 Adult: 50
Pediatric: 75
5 bpm
Extreme Tachy 60 to 300 Adult: 160
Pediatric: 180
5 bpm
Extreme Brady 15 to 120 Adult: 35
Pediatric: 50
5 bpm
Multif. PVCs Window 3 to 31 15 1 Beats
V-Tach Rate 100 to 200 130 5 bpm
V-Tach PVCs 3 to 12 6 1 Beats
Pause Time 1.5, 2.0, 2.5 2.0 / s
Vbrd Rate 15 to 60 40 5 bpm
Vbrd PVCs 3 to 99 5 1 Beats
You can also set arrhythmia threshold from the ECG Setup menu in the configuration mode.