Mindray BeneHeart D3, Руководство оператора

Страница: 49 / 186

5-9
5.11 Latching Alarms
The latching setting for physiological alarms defines how alarm indicators behave when you do not acknowledge them.
„
If an alarm is latched, alarm indications remain presented even though alarm conditions end, except that:
‹
The parameter reading and violated alarm limit stop flashing.
‹
The time when the alarm is last triggered is displayed behind the alarm message.
„
If an alarm is not latched, the alarm indications disappear as soon as the alarm conditions end.
To latch a physiological alarm,
1. Press the Main Menu button on the front panel, and then select [ Others >> ] [
→
Configuration >> ] enter the
→
required password.
2. Select [ Alarm Setup ] and set [ Latching Alarms ] to [ Yes ].
Only physiological alarms can be latched.
You can clear the latched alarms by pressing the hardkey.
5.12 Clearing Technical Alarms
For some technical alarms, their alarm lamp flashing and alarm tones are cleared and the alarm messages change to
prompt messages after the hardkey or [ Audio Pause ] soft key is pressed. After the equipment restores the normal
alarm status, it can give alarm indications correctly in case these alarms are triggered again.
For some technical alarms, all their alarm indications are cleared after the hardkey or [ Audio Pause ] soft key is
pressed. After the equipment restores the normal alarm status, it can give alarm indications correctly in case these
alarms are triggered again.
For others, their alarm tones are cleared but the alarm lamp flashing and alarm messages remain after the hardkey
or [ Audio Pause ] soft key is pressed. After the equipment restores the normal alarm status, all the alarm indications will
continue if the alarm conditions still present.