Mindray BeneHeart D3, Руководство оператора

Страница: 38 / 186

3-4
You can also set system time by selecting [ Configuration >> ]
→
[ View Config ]
→
[ General Setup >> ]. However, you
cannot select date format and time format in this case. After the completion of setting system time, exit the
configuration mode, and then the system will restart.
3.4.2 Adjusting the Screen Brightness
1. Press the Main Menu button on the front panel, and then select [ Others >> ].
2. Set [ Brightness ] to an appropriate level: 10 is the brightest, and 1 is the least bright.
You can also change screen brightness by entering configuration mode and selecting [ Others ] from the Configuration
Main menu.
3.4.3 Changing Key Volume
1. Press the Main Menu button on the front panel, and then select [ Others >> ].
2. Select [ Key Volume ] and then select an appropriate value. 0 means key volume off and 10 is the maximum volume.
You can also change key volume by entering configuration mode and selecting [ Others ] from the Configuration Main
menu.
3.4.4 Selecting High Contrast Mode
The equipment has the function of high contrast display so that the user can view the display under high ambient
illumination.
To enable the High Contrast display,
„
In the Monitor, Manual Defib and Pacer mode, press the Main Menu button on the front panel, and then select
[ High Contrast ]. To disable high contrast display, select [ Full Color ] in the Main Menu.
„
In AED mode, press the [ High Contrast ] soft key. To disable high contrast display, press the [ Full Color ] soft key.
Once High Contrast is selected, the system remains in high contract mode when you change the operating mode.
However, the setting will not be saved if the equipment is turned off.