MIMAKI CG-100EX, Руководство по эксплуатации

Страница: 41 / 110

– 2.19 –
Loading a roll sheet (CG-60EX)
In the case where a roll sheet is used, roll hanger to be mounted on the device.
Refer to page 1.18 for how to mount the roll hanger.
1) Attach the roll bar assembly to the roll
hangers.
Place the roll bar assy. in the slit 1 or 2
according to the outside diameter of the roll
sheet to be used.
• If the outside diameter of the roll
sheet is 3 inches or more, put the
roll bar assy. in the slit 1 or 2.
• If the outside diameter of the roll
sheet is 3 inches or less, put the roll
bar assy. in the slit 2 or 3.
2) Load a roll sheet.
Place a roll sheet on the roll bar, pass the top
end of the sheet through the platen and change
the location of the pinch rollers according to
the sheet width.
* Change the location of the pinch
rollers so that each one is placed 5
mm or more inside the sheet width.
If not, the sheet can slip off the
pinch rollers while it is being fed.
3) Hold a sheet
Tilt the sheet set lever away from you and lower
the pinch rollers.
1
2
3
Sheet
Roll hanger
Roll bar