MIMAKI CG-100EX, Руководство по эксплуатации

Страница: 20 / 110

– 1.10 –
4) Fix the main unit on the stands.
Using the hexagon wrench key supplied with
the unit, secure the main unit on the stands
with two M8 cap bolts. After tightening the
bolts, attach rubber caps onto them.
5) Securely tighten the bolts that are used
to temporarily fix the stand stay onto
the stands.
After tightening the bolts, attach rubber caps
onto them.
6) Attach the roll stays to the stands.
Attach the roll stays mounted with a roll stopper
assembly to the right-hand side of the stand as
observed from the front of the main unit.
• Each roller stay can be mounted to
one of three different locations.
You can attach two roller stays
respectively to the locations that
facilitate your work.
Rubber cap
Right stand
Left stand
Roll stay with roll stopper