MIMAKI CG-100EX, Руководство по эксплуатации

Страница: 15 / 110

– 1.5 –
6) Power switch
It turn on/off the power.
7) Sheet sensor
It detects the presence of the sheet and sheet length.
8) Pen line rubber
The device performs cutting or plotting on the pen line rubber.
9) Pen line sponge
The device performs pouncing on the pen line sponge.
10) Grid roller
The grid rollers operate in combination with the pinch rollers to feed out the sheet.
11) Pinch roller
The pinch rollers can be moved to the right or left to adapt to the size of sheet to be used.
The pinch rollers feed out the sheet while pressing it against the corresponding grid rollers.
12) Scale
The scale is used as a guide when loading a sheet of medium on the device. It is used in
combination with the rear scale.
13) Platen
The sheet of medium moves along the platen.
14) “PINCH ROLLER SETTINGS” Mark
The marks indicate the locations at which the pinch rollers are set.
15) Clamp lever
This lever is used to adjust the force by which the clamp is held.
16) Roll hanger
Roll hangers support the roll bars.
17) Roll bar
A roll sheet is placed on the two roll bars.
18) RS-232C interface connector
The RS-232C compatible interface connector. It is connected to the RS-232C connector of the
host computer via an interface cable.
19) 8 bit parallel interface connector
The Centronics compatible interface connector. It is connected to the printer connector of the
host computer via an interface cable.