MIMAKI CG-100EX, Руководство по эксплуатации

Страница: 19 / 110

– 1.9 –
ASSEMBLING THE MAIN UNIT AND STANDS (CG-100EX, 130EX)
Attach the roll stays to the stands. The roll stay can be mounted to stand on the front or rear face of
the main unit. Mount the roll stays to either stand according to your work.
* The main unit is heavy in weight. Be sure to assemble the main unit and the
stands with two or more persons to avoid danger.
1) Attach the stand stay to the stand as-
sembly.
Put the M8 cap bolt attached to the stay in the
hole located inside the stand. Mount the stay
to the stand with the M8 cap bolt using the
hexagon wrench key supplied with the unit.
The bolt has to be temporarily tightened.
* Be sure to position the stay so that
its rounded edge side faces upward.
2) Lock the casters to secure the stands.
3) Aligning the slit on the side plate of the
main unit with the pin of the stands,
place the main unit on the stands.
* Do not hold the main unit by its
both ends when putting the main
unit on the stands to prevent hands
from being caught between the
main unit and the stands.
Stand stay
Stand
M8 bolt
Notch
Hexagonal
wrench key
Lock
Pin