eGROSS pro-x - eGROSS
MM137-004 - Operator Manual
12
Filter (CODE 102915, supplied as an optional part, refer to chapter 5.2)
In the event of connection to the filter, the Ventilation system connected to the unit must compensate for the
550Pa pressure drop of the filter.
- Dimensions: LxDxH 618mmx780mmx1450mm (24.3
’’x30.7’’x57’’)
- Infeed and outfeed dimensions Ø: 200mm (7.9in)
- Weight: 72kg (158.7lb)
Fixative loading/unloading system:
- Container transport trolley in stainless steel (dimensions: LxDxH 350 x 500 x 750mm - 13.8x19.7x29.5in,
dimensions container housing base: 470 x 320mm - 18.5x12.6in, max container height 400mm-15.8in),
equipped with a containment tank for any spills (capacity: 0.55 litres), a grille and a retainer for the container
- Fixative dispenser with pedal control
-
“Used fixative” container cap equipped with “full container” sensor and fume extraction system (threading
type S55)
- Cap for "new fixative" container (S55 threading). This container is not supplied with the unit.
- The work surface is equipped with a recessed funnel for draining the used fixative in the dedicated container
including the filter
Auxiliary sockets
- For connecting instruments/optional parts (such as printers, scales, etc.)
- 2 type sockets IEC 320 C13 230Watt/1A max total
Environmental conditions:
-Operating temperature: 15°C
–30°C (59°F-86°F)
-Relative humidity: 10°C - 80% without condensation
-Altitude: up to 2000m (78.7in)
-Maximum temperature of contact surfaces: lower 40°C (104°F)
1.4. Compatible reagents
Water, ethanol, formaldehyde 10% volume/volume (4% weight/weight), zinc formalin (no chloride), FineFIX,
alcohol-based fixatives, inks.
It is necessary to connect the unit to a fume extraction system.
Output air flow rate: 1200 m³/h ± 100 m³/h.
The system must allow for a flow rate of at least 1300m³/h in case is not present one of the
two filters provided as optional part (refer to chapters 5.2 and 5.3).
Do not use overly acidic reagents (pH <4).
DO NOT USE ANY REAGENTS OTHER THAN THOSE LISTED ABOVE.
For
any
doubts,
please
contact
us
at
the
following
address:
