40
ORTHORA 200
Instruction Manual
8.1.4 Daily maintenance
of the rinsing basin
Dry this premium material (glass or ceramic) using a soft lint-free tis-
sue. Use a wash-leather for cleaning. Remove limestone with a warm
vinegar-water mixture. Dry it with a clean and soft lint-free tissue.
In order to facilitate the removal and reattachment of the basin, we
recommend to regularly lubricate the O-rings with 320.3981.01 (see
8.2.2 Weekly maintenance of the spittoon).
Never use scratching sponges, abrasives, scrubbing cleaning agents
nor nitro thinners or synthetic resin thinners. The glass is not suitable
for thermo-disinfection.
Use a standard surface disinfectant to disinfect the rinsing basin.
Regularly clean and disinfect the surface of the basin, e.g. with Dürr
Surface Disinfection FD 322 / FD 350.
8.1.5 Daily maintenance
of the cup holder
The cup holder is made of Corian or ceramic. Clean the cup holder
with a soft tissue. Clean limestone with a warm vinegar-water mixture
or Orotol ultra and dry it with a clean and soft tissue.
Heavy soiling can be cleaned using Scotch (Scotch-Brite Hand Pad
Nr. 97) or a standard liquid cleaner under running warm water. The
cup holder needs to be removed for this purpose.
In order to facilitate the removal and reattachment of the cup holder,
we recommend to regularly lubricate the O-rings with 320.3981.01
(see 8.2.2 Weekly maintenance of the spittoon).
Never use scratching sponges, abrasives, scrubbing cleaning agents
nor nitro thinners or synthetic resin thinners.
Use a standard surface disinfectant to disinfect the cup holder. Regu-
larly clean and disinfect the surface of the cup holder, e.g. with Dürr
Surface Disinfection FD 322 / FD 350.
8.1.6 Daily maintenance of the
bubbler, filling pipe, flushing
pipe and drain cover
These components have an electro-chemical coating. For cleaning
use warm water or Orotol ultra. Clean them with a soft tissue and a
cleaning solution, then rinse them with clear water and dry them with a
soft tissue. In occasion of scratches, remove them with soft steel wool
or Scotch ( Scotch-Brite Hand Pad Nr. 7447), rubbing in direction of
the surface’s grain.
In occasion of limestone, clean it with a warm vinegar-water mixture.
In order to facilitate the removal and reattachment of the components,
we recommend to regularly lubricate the O-rings with 320.3981.01
(see 8.2.2 Weekly maintenance of the spittoon).
Use a standard surface disinfectant to disinfect the components. Re-
gularly clean and disinfect the surface of the components, e.g. with
Dürr Surface Disinfection FD 322 / FD 350.
8.1.7 Daily maintenance of the instruments
Disinfect used instruments after each patient and autoclave them if re-
quired to protect the dentist and the patient. For information on techni-
cal features as well as on operation and application of the instruments
please consider the specific instruction manuals which come with the
instruments. Please service and handle the instruments as specified in
the maintenance instructions of the specific manufacturer.
Never spray the instruments with a disinfectant solution.
Do not insert the device into an ultrasonic bath.