14
ORTHORA 200
Instruction Manual
7. Operation
For safety reasons the device must be switched off at the main control
switch on the power terminal when leaving the practice. All power
outlets of the supply unit become dead. Water supply of the instru-
ments is interrupted by a corresponding magnet valve within the chair
socket. As a consequence, it is impossible for water to leak from the
device.
7.1
Main switch
“Device on” is signaled by a shining red device protect switch on the
power terminal.
= Off
–
= On
Before leaving the practice: Switch off the main switch to avoid water
damages.
7.2
Pedal functions
The device can be operated using the following function pedals:
1
Function pedal for automatic and manual chair control “bed”
2
Function pedal for automatic and manual chair control “backrest”
3
Function pedal for special functions (optional)
4
Function pedal for instrument operation (optional)
For instrument operation there are optional the following pedals avai-
lable that can be connected in parallel with the built-in instrument
pedal.
stand-alone 2-function pedal or stand-alone 5-funtion pedal (7.2.4)
stand-alone 1-function pedal or stand-alone 4-function pedal DYN
(7.2.3)
7.2.1 Chair control
Chair movement is controlled by two 3-function pedals.
Pedal 1, function 1:
automatic treatment position 1
By tapping the function pedal once, the chair moves automatically to a
freely programmable treatment position 1.
Pedal 1, function 1:
automatic treatment position 2
By tapping the function pedal twice, the chair moves automatically to a
freely programmable treatment position 2.
Pedal 1, function 2:
bed up (manually)
Pedal 1, function 3:
bed down (manually)
Pedal 2, function 4:
entry/exit position (automatically)
Pedal 2, function 5:
backrest up (manually)
Pedal 2, function 6:
backrest down (manually)
7.2.2 Special functions
Operation of ORHTOLUX 200 and/or special functions
7
ORHTOLUX 200 on/off or external lamp on/off
Double-tapping changes between ORHTOLUX 200 and foreign
functions. Foreign functions are shown by a special function LED
(S) on the display (7.2.3 or 7.2.4).
8
Swivel ORHTOLUX 200 forward
9
Swivel ORHTOLUX 200 back
or switch external device on (as long as pedal is pressed)
1 2 3 4
/
–