Miele KFNS 37432 iD, Инструкции по эксплуатации и монтажу

Страница: 93 / 104

Building in the appliance
93
 Now push the appliance into the
niche until all fixing brackets at the
top and bottom are touching the front
edge of the cabinet side wall.
This ensures a distance of
1 5/8" (42 mm) to the front edges of
the cabinet side walls all the way
round.
–  5/8" (16 mm) thick walls:
The spacers should touch the front
edge of the cabinet side walls at the
top and bottom.
–  3/4" (19 mm) thick walls:
The front edges of the top and bot-
tom hinges should be flush with the
front edge of the cabinet side wall.
Important for cabinetry with door
fittings (e.g., knobs, raised seals,
etc.):
The dimension of these must be taken
into account to ensure there is a gap
of
1 5/8" (42 mm) all round.

Pull the appliance forwards by the
appropriate dimension.

Check again to make sure there is a
gap of
1 5/8" (42 mm) to the front
edges of the door fittings all round.
Tip: If possible, remove the door fittings
and push the appliance into the niche
until all fixing brackets at the top and
bottom are touching the front edge of
the cabinet unit side wall.

Align the appliance on both sides via
the adjustable feet using the wrench
supplied, so that it stands upright.