Miele KFNS 37432 iD Скачать руководство пользователя страница 44

Страница: 44 / 104

Adjusting the interior fittings

Adjusting the door shelf/bottle
shelf

Danger of injury!
Only move the door shelves/bottle
shelves in the door when they are
empty.



Push the door/bottle shelf upwards,
then remove it by pulling it forwards.



Replace the shelf at the required
height. Ensure that it is securely
pushed back into position.

Moving the shelf/shelf with
lighting

The shelves can be adjusted according
to the height of the food.



Lift the shelf at the front, pull it for-
wards slightly, lift the recess over the
shelf supports and move the shelf up
or down.



Push in the shelf until it clicks into po-
sition.

The stop at the back of the shelf must
face upwards so that food does not
touch the rear wall and freeze to it.

Stops prevent the shelves from being
dislodged by mistake.

Shelf with lighting

The LED lighting is located on the stain-
less steel trim of the shelf. By adjusting
the position of the shelf in the refrigera-
tor section, you can change the illumi-
nation in this section as required.

Adjusting the bottle rack

The bottle rack can be placed at differ-
ent positions in the machine.



Lift the bottle rack slightly at the front,
pull it forward a little, lift the recess
over the shelf supports, and move the
shelf up or down.

The stop bar at the back must face up-
ward to prevent the bottles from touch-
ing the back wall.

Stops prevent the bottle rack from be-
ing dislodged by mistake.

Содержание KFNS 37432 iD









































































































Результаты поиска

Содержание KFNS 37432 iD

Отзывы:

Бренды по названию

Популярные бренды

Miele KFNS 37432 iD, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KFNS 37432 iD

Отзывы:

Бренды по названию

Популярные бренды