manualshive.com logo in svg

Miele KFNS 37432 iD, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KFNS 37432 iD Скачать руководство пользователя страница 21

Switching on and off

21

Before first use

Packaging material

Remove all packaging material from
the inside of the appliance.

Protective film

The stainless steel trim on the interior
shelves and door shelves in the appli-
ance has a layer of protective film to
prevent scratching in transit.

Remove this protective film once the
appliance has been installed.

Cleaning the refrigerator

Please refer to the relevant instruc-
tions in “Cleaning and care”.

Clean the inside of the appliance and
the accessories.

Operating the appliance

A light touch on the sensors is all that is
required to operate this appliance.

A tone will sound each time a sensor is
touched. You can deactivate this if you
wish (see “Selecting additional settings
- Audible signals”).

Switching on the appliance

Once the appliance is connected to the
electricity supply, the power supply
symbol 

 will soon appear on the dis-

play.

Touch the On/Off button.

The power connection symbol 

 goes

out and the appliance starts to cool
down.

The sensor buttons for the available
zones will appear on the control panel:

The Fridge Zone sensor button is high-
lighted in yellow and the current tem-
perature in this zone appears on the
display.

Содержание KFNS 37432 iD









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды