manualshive.com logo in svg

Miele KFNS 37432 iD, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KFNS 37432 iD Скачать руководство пользователя страница 5

IMPORTANT SAFETY INSTRUCTIONS

5

This appliance complies with all statutory safety requirements.
Please note that inappropriate use can lead to personal injury and
damage to property.

To avoid the risk of accidents and damage to the appliance,
please read these instructions carefully before using it for the first
time. They contain important notes on installation, safety, use and
maintenance.

Miele cannot be held liable for non-compliance with these instruc-
tions.

Keep these instructions in a safe place and ensure that new users
are familiar with the contents. Pass them on to any future owner.

Appropriate use

 

This appliance is intended for use in the home and similar environ-

ments.
This appliance is not intended for use outdoors, in damp environ-
ments or in places exposed to rain.

 

This appliance is intended for domestic use only for cooling and

storing food and drink as well as for storing deep frozen food, freez-
ing fresh food and for making ice.
Any other usage is not supported by the manufacturer and could be
dangerous.

 

This appliance is not suitable for storing and keeping cool

medicines, blood plasma, laboratory preparations or other such ma-
terials or products. Incorrect use of the appliance for such purposes
can cause deterioration of the items stored. The appliance is not
suitable for use in areas where there is a risk of explosion.
Miele cannot be held liable for damage resulting from improper or in-
correct use of the appliance.

Содержание KFNS 37432 iD









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды