manualshive.com logo in svg

Miele KFNS 37432 iD, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KFNS 37432 iD Скачать руководство пользователя страница 59

Frequently Asked Questions

59

With the help of the following guide minor faults in the performance of the ma-
chine, some of which may result from incorrect operation, can be remedied with-
out contacting the Service Department.

This guide may help you to find the reason for the fault, and how to correct it.

To prevent cold from escaping, open the appliance doors as little as possible un-
til the fault has been corrected.

Problem

Possible cause and solution

The appliance is not
getting cold, the interior
lighting does not come
on when the door is
opened, and the display
is not lit up.

The appliance is not switched on and the power sup-
ply symbol 

 is lit up in the display.

Switch the appliance on.

The plug is not properly plugged into the electrical
outlet.

Insert the plug correctly into the socket. The power
supply symbol 

 appears in the display when the

appliance is switched off.

Check whether the fuse has tripped. There could be a
fault with the appliance, the household electrical
wiring or another electrical appliance.

Contact a qualified electrician or Miele Technical
Service for assistance.

The compressor comes
on less and less often
and for shorter periods
of time. The tempera-
ture in the appliance
rises.

Not a fault. The temperature setting is too high.

Correct the temperature setting.

Check the temperature again after 24 hours.

The food begins to thaw. 
The room temperature is too low for this appliance. 
If the room temperature is too low, the compressor
will run less frequently. This may cause the freezer to
become too warm.

See the “Installation location” section in the “In-
stallation information”.

Increase the room temperature.

Содержание KFNS 37432 iD









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды