manualshive.com logo in svg

Miele KFNS 37432 iD, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KFNS 37432 iD Скачать руководство пользователя страница 10

IMPORTANT SAFETY INSTRUCTIONS

10

Cleaning and maintenance

 

Do not use any oil or grease on the door seals. 

They can cause the seals to deteriorate over time.

 

Never use a steam cleaner to clean the appliance. 

The steam can reach the electrical components and cause a short
circuit.

 

Sharp edged or pointed objects will damage the evaporator, caus-

ing irreversible damage to the appliance. Do not use sharp edged or
pointed objects to

– remove frost or ice,

– separate frozen foods or remove ice trays.

 

Never place electric heaters or candles in the appliance to defrost

it. These can damage the plastic parts.

 

Do not use defrosting sprays or de-icers, as they could contain

substances which could damage the plastic parts or which might
cause the build-up of gases and pose a danger to health.

California Proposition 65

– This product contains chemicals known to the state of California

to cause cancer or reproductive harm.

– This product can expose you to chemicals including Diisononyl

Phthalate (DINP) which is known to the State of California to
cause cancer. For more information go to www.P65Warn-
ings.ca.gov.

– This product can expose you to chemicals including Di-isodecyl

Phthalate (DIDP) which is known to the State of California to
cause birth defects or other reproductive harm. For more informa-
tion go to www.P65Warnings.ca.gov.

Содержание KFNS 37432 iD









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды