manualshive.com logo in svg

Miele KFNS 37432 iD, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KFNS 37432 iD Скачать руководство пользователя страница 92

Building in the appliance

92

Carefully remove the protective foil
from the profile strip 

.

Stick the profile strip 

 onto the side

of the appliance on which the door
will open, flush with the front.

1. Align the profile strip with the bottom

edge of the top fixing bracket.

2. Stick it down along its entire length.

Building in the appliance

If the appliance is pushed too far into
the niche, the doors may not close
properly once the cabinet doors have
been installed. This can cause ice to
build up, condensate to accumulate,
and cause the appliance to malfunc-
tion. These can all lead to increased
energy consumption.
Push the appliance into the building-
in niche making sure a gap of

1 5/8" (42 mm)

 is maintained all

round between the appliance casing
and the front of the cabinet side
walls.

Содержание KFNS 37432 iD









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды