manualshive.com logo in svg

Miele KFNS 37432 iD, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KFNS 37432 iD Скачать руководство пользователя страница 28

Using Automatic SuperCool and SuperFreeze

28

The automatic SuperCool func-
tion

The automatic SuperCool function can
be used to rapidly reduce the tempera-
ture in the refrigerator section to its low-
est setting (in line with room tempera-
ture).

Turning on automatic SuperCool

Automatic SuperCool is particularly rec-
ommended for rapidly chilling large
amounts of fresh food or drink.

Select the sensor for the refrigerator
section.

The refrigerator section symbol will light
up in yellow.

Touch the SuperCool button; it will
light up in yellow.

The appliance will work at full power to
lower the temperature in the refrigerator
section.

Turning off automatic SuperCool

The automatic SuperCool function turns
off automatically after approx. 12 hours.
The appliance will then continue to op-
erate at normal power.

To save energy, the automatic Super-
Cool function can be turned off once
the food and drinks are sufficiently
chilled.

Select the sensor for the refrigerator
section.

The refrigerator section symbol will light
up in yellow.

Touch the SuperCool button; the yel-
low light will go out.

The appliance will run at normal power
again.

Содержание KFNS 37432 iD









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды