manualshive.com logo in svg

Miele KFNS 37432 iD, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KFNS 37432 iD Скачать руководство пользователя страница 36

Selecting additional settings

36

You can now select °F by touching
the 

 or 

 button.

Touch the OK button to confirm your
selection.

The selected setting will be saved.

Touch the settings button to exit set-
tings mode.
If you do not, the appliance will exit
settings mode automatically after ap-
proximately one minute.

The temperature will now be displayed
in Fahrenheit.

Acoustic signals 

The appliance has acoustic signals
such as the button tone and the door
and temperature alarms.

You can turn the button tone and the
door alarm on and off, but you cannot
turn off the temperature alarm.

There are four settings to choose from.
Option 

3

 is set at the factory; this

means that the button tone and the
door alarm are turned on.

Turning acoustic tones on or off

Touch the settings sensor.

All symbols available for selection will
appear in the display and the 

 

 sym-

bol flashes.

Touch the sensors for setting the
temperature (

 or 

) repeatedly until

the 

 

 symbol flashes in the display.

Touch the OK sensor to confirm your
selection.

The last selected setting flashes and
the 

 

 symbol lights up in the display.

Содержание KFNS 37432 iD









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды