Miele KFNS 37432 iD Скачать руководство пользователя страница 55

Страница: 55 / 104

Cleaning and care



Grasp the plastic surround on the
left-hand side of the stainless steel
trim at its furthest back point.

1. Pull the plastic surround from the

shelf and

2. pull the trim off at the same time.

Then do the same on the opposite
side.

3. Remove the protective strip.



After cleaning, reattach the stainless
steel strip / the protective strip by fol-
lowing the same procedure in re-
verse.

Dismantling the bottle and door
shelves



The stainless steel trim on the

bottle and door shelves is not suit-
able for dishwashers.
Remove the trim before cleaning the
door shelves in a dishwasher.

To remove the stainless steel trim, pro-
ceed as follows:



Place the door/bottle shelf with the
front side to the work surface.



Remove one end of the trim and pull
it off the shelf. The entire section of
stainless steel trim will now come off
the shelf.



After cleaning, reattach the stainless
steel trim to the shelf by following the
same procedure in reverse.

Содержание KFNS 37432 iD









































































































Результаты поиска

Содержание KFNS 37432 iD

Отзывы:

Бренды по названию

Популярные бренды

Miele KFNS 37432 iD, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KFNS 37432 iD

Отзывы:

Бренды по названию

Популярные бренды