Miele KFNS 37432 iD Скачать руководство пользователя страница 52

Страница: 52 / 104

Automatic defrosting



WARNING! DANGER of injury

and damage!
Do not use any mechanical or other
types of aids which are not recom-
mended by the manufacturer to ac-
celerate the defrosting process.

Refrigerator section

The refrigerator defrosts automatically.

Condensate and frost can build-up on
the back wall of the refrigerator when
the compressor is running. There is no
need to remove it, since it will evaporate
automatically with the warmth gener-
ated by the compressor.

The condensate is drained away
through a channel and drain hole, then
fed into an evaporation system at the
back of the appliance.



Condensate must be able to

drain away unhindered at all times.
Keep the condensate channel and
drain hole clean to enable this.

Freezer Zone

The appliance is equipped with a
“NoFrost” system. The freezer defrosts
automatically.

The moisture generated in the appli-
ance collects on the condenser and is
automatically defrosted and evaporates
periodically.

This automatic defrosting system en-
ables the freezer to remain permanently
ice-free. However, the food stored in
the freezer will not defrost.

Содержание KFNS 37432 iD









































































































Результаты поиска

Содержание KFNS 37432 iD

Отзывы:

Бренды по названию

Популярные бренды

Miele KFNS 37432 iD, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KFNS 37432 iD

Отзывы:

Бренды по названию

Популярные бренды