manualshive.com logo in svg

Miele KFNS 37432 iD, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KFNS 37432 iD Скачать руководство пользователя страница 61

Frequently Asked Questions

61

Problem

Possible cause and solution

The compressor runs
continuously.

This is not a fault. To save energy, the compressor
runs at a lower speed, but for longer, when less cool-
ing is required. In this way, the running time of the
compressor is extended.

An LED indicator light is
flashing at the back of
the refrigerator at the
bottom near the com-
pressor (depending on
model). 
The electronic unit for
the compressor is
equipped with an oper-
ation and fault diagno-
sis LED indicator light.

The indicator light flashes several times every 5 sec-
onds. 
A fault has occurred.

Contact the Technical Service department.

The indicator light flashes regularly every 15 sec-
onds. 
Not a fault. This flashing is normal.

The door seal is dam-
aged and needs to be
replaced.

No tools are required to change the door seal.

Contact Miele Service.

Ice or condensation has
built up inside the appli-
ance.

The door seal has come out of its groove.

Check that the door seal is correctly positioned in
the groove.

The door seal is damaged.

Check whether the door seal is damaged.

Содержание KFNS 37432 iD









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды